Table of Contents
Advertisement
Reverse this procedure to install the keyboard/top cover.
TouchPad
Component
TouchPad (includes cable)
Before replacing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the TouchPad:
1.
Turn the keyboard/top cover upside down with the front toward you.
2.
Remove the two Phillips PM1.9×2.1 broad head screws (1) that secure the TouchPad to the
keyboard/top cover.
3.
Press on the tab (2) on the back of the TouchPad to release the ToucPad from the keyboard/
top cover.
NOTE:
opening (3) in the keyboard/top cover.
When releasing the TouchPad, make sure the TouchPad cable routes through the
Keyboard/top cover on page
Spare part number
761221-001
17).
TouchPad
21
Advertisement
Table of Contents
