Table of Contents
Advertisement
WARNING:
BEFORE CARRYING OUT ANY MAINTENANCE.
1) Keep all safety devices, air vents and the motor housing free of dirt and dust. Use a soft, dry
brush to clean the equipment regularly.
2) Clear all dirt or debris from the collection tank after each use. Allow to dry before replacing the
power head. Do not use cleaning agents or solvents; these may damage the appliance.
3) Check the hose, attachments, and power cord to verify that they have not been damaged or
any debris is trapped and blocking airflow.
1. Cleaning Cartridge Filter & Pre-filter
Remove the filter and clean by gently tapping or brushing off dirt. For optimal performance it is
recommended to replace the old filter with a new filter regularly.
2. Cleaning Foam Filter
Remove the foam filter and use a mild soap and water solution to wash and rinse with
clean water (Fig. 13). Allow filter to air dry before installing and using again.
MAINTENANCE
REMOVE THE POWER CORD FROM THE POWER SUPPLY
13
GB
Advertisement
Table of Contents
