Download Print this page

iSimple GateWay Procedure page 8

Reset procedure

Advertisement

• Tune down - Turn the TUNE KNOB counter-clockwise to move down one
frequency at a time.
• SEEK
will seek up to the next available station based on signal strength.
• SEEK
will seek down to the next available station based on signal strength.
Storing & Recalling Presets (Panasonic Radios):
• Tune to the desired station. Press the TUNE KNOB to enter the Preset Menu. Use
the CAT/FLDR
or CAT/FLDR
buttons to select a Preset location. Press the
TUNE KNOB to store the station into memory. The radio will display PRSAVED. To
recall a preset station press the TUNE KNOB to enter the Preset Menu. Use the
CAT/FLDR
or CAT/FLDR
buttons to select a Preset. Wait 3 seconds and the
radio will select the displayed preset. HD and analog stations can be stored. HD
stations are indicated by HD1 or HD2 following the station frequency.
Storing & Recalling Presets (Delphi Radios):
• Tune to the desired station. Press and hold a PRESET 1-6 and hold for
approximately 3 seconds until the radio displays PRSAVED. To recall a preset
station, press the desired PRESET button. HD and analog stations can be stored.
HD stations are identified by HD1 or HD2 following the station frequency.
DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the
HDRT be held liable for consequential damages sustained in connection with the HDRT.
The manufacturer and its distributors will not, nor will they authorize any representative
or any other individual to assume obligation or liability in relation to the HDRT other than
its replacement.

Advertisement

loading
Need help?

Need help?

Do you have a question about the GateWay and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

DualinkPxamgPxaux