iSimple GateWay Procedure page 11

Tech Tip
Lightning to 30-pin adaptor
Using a Lightning to 30‐pin adaptor with the iSimple GateWay.
While in use, if the lightning to 30‐pin adaptor becomes disconnected from the iPhone 5, and is still
connected to the GateWay cable, text and control from the radio will not operate correctly when the
lightning adaptor is simply plugged back into the iPhone.
To regain proper control and operation, you must disconnect the (Lightning to 30‐pin) adaptor from the
GateWay cable.
OR
When reconnecting; the adaptor and phone can be connected back in any order.
When the Lightning to 30‐pin adaptor is reconnected to the GateWay cable, the GateWay can recognize
the new device connected, and full control will be accessible from the radio, with text from the iPhone
displayed on the radio.