Cisco Rugged Series Installation Manual page 26

Cable Side View LEDs
LED
Port Link
PSU 1
PSU 2
SD
GPS
ALARMS IN 1-2
Cisco Catalyst IR8340 Rugged Series Router Hardware Installation Guide
12
Port LED Color
Off
Green
Blinking green
Alternating green/amber
Amber
Green
Red
Blinking red
Off
Fast blinking amber
Slow blinking amber
Solid green
Solid amber
Blinking green
Solid green
Blinking green
Blinking amber
Off
Green
Solid red
Blinking red
Product Overview
Description
No link.
Link up. No activity.
Link up with active traffic.
SFP not supported or link fault.
Port disabled.
Valid input is present, and the
output is within the operating range.
Valid input is present, and the
output is outside the operating
range or is not present.
Power-supply module (1 or 2) is
installed but valid input is not
present.
Power-supply module (1 or 2) is
not installed.
Unsupported SD flash memory card
is detected.
SD flash memory card is not
present.
SD flash memory card is
functioning.
Error accessing SD flash card. No
IOS boot image found.
SD flash memory card transfer in
progress.
Active with satellite fix.
Attempting to acquire satellite fix.
Antenna fault.
GPS is not configured.
No alarm.
Major alarm present.
Critical alarm present.