Advertisement
Quick Links
Advertisement
Related Manuals for Dakota Alert DCHT-2500
Summary of Contents for Dakota Alert DCHT-2500
- Page 1 DCHT-2500 Wireless Rubber Hose Transmitter Owner’s Manual...
- Page 2 Installation: The DCHT-2500 transmitter consists of a transmitter box and 25 feet of hose. To install, connect the hose to the stem on the transmitter box, then lay the hose across the driveway. Mount the transmitter box on a tree or wooden post at least three feet off the ground (see figure...
- Page 3 Operation: (Always test unit prior to installation) The control box is powered by one 9-volt battery. Coding the transmitter: Note: The transmitters and receivers are preset at the factory. DO NOT change settings, unless changing the tune or experiencing false signals. 1.
- Page 4 figure 2 figure 3...
- Page 5 Table to select tones: Note: If more than one transmitter is Switch 9 Switch 10 Channel Tune used with the receiver, the first eight dip switches of all transmitters must match Classical the eight dip switches of the receiver. Westminster Ding Dong Note: Whenever a change is made to any Whistle...
- Page 6 Troubleshooting the DCHT-2500 If the transmitter is not detecting, try one of these: • Change the battery in the transmitter. • Make sure the transmitter and receiver are coded alike. • Move the transmitter closer to the receiver. • Keep the transmitter away from large metal objects that may interfere with the radio signal.
- Page 7 Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of God or improper operation.
- Page 8 Dakota Alert, Inc. 32556 E. Main St. P0 Box 130 Elk Point, SD 57025 Phone: (605) 356-2772 Fax: (605) 356-3662 Web: www.dakotaalert.com...