Function Table; Operation - A&D MX-50 Instruction Manual

F u n c t i o n Ta b l e
12
The function table stores the following parameters to control the analyser.
Details of the Function Table
Item and Display Symbol Parameter
Clock CL AdJ Set date and time to built-in clock. Refer to "5.2. Setting the clock and calendar"
Decimal point
dP
Data output mode Prt
Data memory dAtA
function
Form selection 5-d
Output format
adapted to GLP
inFo
GMP and ISO
ID number id
Factory settings CLr
1
* : Factory settings
2
* : Use this parameter when connected to a computer. Not suitable for the AD-8121.
Not suitable for the the DP-1012 printer if stream mode is selected.

12.1.1. Operation

1. Turn on the analyser.
The display will show 0.000 g.
2. Press and hold the SELECT key to enter the

function table.

Select an Item
3. Select an item using the following keys.
Example: Data output mode prt is selected.
SELECT key . . . . .Selects a figure.
ENTER key . . . . . .Enters the selected item.
RESET key . . . . . .Cancels the operation and
Select a Parameter
4. Select a parameter using the following keys.
Example: Auto print mode prt 1 is selected.
or key . . . . .Selects a parameter.
ENTER key . . . . . .Stores the parameter and
RESET key . . . . . .Cancels the operation and
5. To finish the operation, press the RESET key to
return to the weighing mode.
GB 30
Description
1
0 * Dot " . "
1 Comma " , "
1
* Key mode
0
1 Auto print mode
2 Stream mode
1
0 * No Memory Function
Data is stored for each measurement
1
1
0 * Moisture content will be output from the serial port
1 Moisture content and temperature are output.*
1
0 * No GLP,GMP,ISO data formatting
1 GLP,GMP,ISO data formatting for calibration data output
ID number setting
Resets the analyser to the factory settings.
returns to the weighing mode.
proceeds to the next item.
returns to the weighing mode.
AND MX-50/MF-50 Instruction Manual
Data is output by the ENTER key
Data is output after measurement.
Data is output continuously.
CL AdJ
Prt
Last parameter
Prt 0
New parameter Prt 1
dAtA
2
0.000
SELECT
SELECT
ENTER
ENTER
RESET
0.000