Table of Contents
Advertisement
The copier cannot be controlled via the copier operation panel while resetting the
offline status. To control the copier via the operation panel, first press the on-line key
to turn the on-line indicator off.
The copier is in the on-line mode (the on-line indicator is on) after the offline status
has been reset. The copier automatically returns to the on-line mode if no copy is
made for a certain period while the copier is offline.
Check the following before starting to control the copier via Xi Repro System or the
copier operation panel.
• Controlling the copier via Xi Repro System
Check if the on-line indicator is on.
If the on-line indicator is off, turn it on by pressing the on-line key.
• Controlling the copier via the copier operation panel
Check if the on-line indicator is off.
If the on-line indicator is on, turn it off by pressing the on-line key.
System Installation
2-7
Advertisement
Table of Contents
