Table of Contents
Advertisement
Network Plotting
6. Network Plotting
In this section, for convenience the Client application running on the Local Client is
called the Local Client application and the Client application running on a Remote
Client the Remote Client application.
The Local Client application operates in two modes: local mode and network mode.
In local mode, the Local Client can use the connected plotter/scanner to both print
and scan. In network mode, the Local Client serves as a plotter server to receive print
jobs from other network Clients, namely Remote Clients, and prints them on the
connected plotter.
In the network mode, the Local Client application provides plotter server facilities
only.
Even though the Local Client application is closed in the network mode, it still serves
as a plotter server. However, no Print Problem messages (indicating print errors) are
displayed. When a print error occurs, restart the Client application and then solve the
problem.
For information on how to operate on the Remote Client, see 3. Using Client, 4.
Using Admin and 5. Using Stamp .
6-2
Advertisement
Table of Contents
