Table of Contents
Advertisement
Using Admin
• Specify Width
Indicates if the width of the scanning area can be specified from the Client
application; "1" when it is enabled or "0" when disabled.
• Fixed Sizes
Indicates if the size of the scanning area can be specified from the Client
application; "1" when it is enabled or "0" when disabled.
• Auto Exposure
Indicates if automatic exposure is enabled; "1" when enabled or "0" when disabled.
• Min Scale Factor
Shows the minimum scale factor available for scanning.
• Max Scale Factor
Shows the maximum scale factor available for scanning.
• Drivers
Shows the name of the driver used for the scanner interface card.
Scan Modes
• Device ID
Lists the device IDs of the scannres.
• Mode Name
A name representing the scanning operation mode.
• Mode ID
An ID that identifies the scanning mode.
4-18
Advertisement
Table of Contents
