Table of Contents
Advertisement
3.7 Inserting and deleting a stamp
3.7.1 Inserting a stamp
The stamp file created by the Stamp application can be inserted into a set or plot. A
stamp inserted into a set can be applied to all the plots in the set. A stamp inserted in
a plot can be applied to that plot only.
Perform the following steps when inserting a stamp.
1. Select the set or plot from the sets/members tree into which a stamp is to be
inserted.
2. Select "Stamp" from the Insert menu or click on the
file select dialog box is displayed.
3. Select the stamp to be inserted and click on the "Open" button.
3.7.2 Deleting a stamp
To delete a stamp, select the stamp to be deleted and press the delete key.
Using Client
button in the toolbar. The
3-17
Advertisement
Table of Contents
