Scan To Ftp Server Function - Fiery KM-C3130 User Manual

2.11 Scan to FTP Server Function

2.11 Scan to FTP Server Function
Below is the setup and operation flow of the Scan to FTP Server function.
A Enable the FTP transfer function
(Enter proxy settings as necessary. See p. 2-27.)
B Register the one-touch key or
temporary registration key
C Enter scan settings
D Set the document and transfer the
image data to the FTP server
E Retrieve the image data
Note
• Image data is transferred using port number "21". Passive mode is not
suported.
2-26
Location of
operation
Controller
operation panel
(See p. 2-27.)
Printer
Management
Utility
(See p. 2-31.)
Copier
operation panel
(See p. 2-11.)
Copier
operation panel
FTP client
computer or Printer
Management Utility
(See p. 2-28.)