Fiery KM-C3130 User Manual page 24

Duplex:
From the drop-down list, select whether to perform
duplex printing by default. If you select duplex
printing, select whether to use long edge binding or
short edge binding. If the device receives a print job
that does not specify the duplex setting, the default
duplex setting is used.
Settings
Copies:
Enter the default number of copies. If the device
receives a print job that does not specify the number of
copies, the default number of copies is used.
Settings
[Apply] button: Click the button to apply the new settings.
[Clear] button: Click the button to clear the settings that were entered
or selected.
Simplex, Left Binding, or Top Binding
1 to 999
1.4 User Mode
1-19