Preparations - Kyocera KM-7530 Operation Manual

3-7 DB Assistant
Database Assist .................... This option creates a csv file of registered file information for scanned image

(1) Preparations

First, perform the following set-up procedure in order to use the DB Assistant.
1. Install the DB Assistant into the network manager's computer. (Refer to page 3-127.)
2. Run the DB Assistant and register the appropriate information under the PDF Keyword Assist, or
Database Assist, option, as desired. (Refer to page 3-12.)
3. Use a Web browser or the operation panel on the scanner itself to register the IP address or the host
name of the computer in which you installed the DB Assistant.
4. Run the Scanner File Utility in the computer in which you want to save the scanned image data and
select either "KM-DB Link Handler" (for the PDF Keyword Assist option) or "Database Link Handler" (for
the Database Assist option). (Refer to page 3-18.)
data files. This file can then be opened and used in, for example, spreadsheet
and database software.
Page 3-124