Kyocera KM-7530 Operation Manual page 69

2-7 Scan to PC Setting
• Registration Number
• Change Group Password
• New Password
• Confirm new password
• Registration button
• Reset button
• Delete button
The number that you selected from the Destination List will be displayed here. This is merely information
in order to remind you which number from the list it is that you are registering or editing information for and
this number cannot be edited itself.
Register the group password into this field.
If you want to change the password, select "Yes". If you do NOT want to change it, select "No".
If you want to change the password number, type a new number into this field (up to 8 digits).
Type the same password as you did in the New Password field in here.
* This procedure is necessary in order to ensure that the password was entered correctly.
Click on this button to have all the selected settings registered in the scanner. If you move to the next page
without clicking on the Registration button, any settings that have not been properly registered will be
deleted.
Click on this button to return all of the settings back to their factory default values.
Click on this button to delete the displayed group.
Page 2-28