Making The Connections - Kyocera FS-C5020N Basic Operation Manual

Making the connections

BASIC OPERATION GUIDE
1
Connect the printer to your
computer. (The connecting
cable is sold separately.)
2
Connect the provided power
cord to a power outlet.
3
Turn on ( | ) the printer's power
switch (located on the left side of the
printer).
4
Set the color registration.
NOTE:
Set the color registration according to the procedures described
in the Advanced Operation Guide, Using the Operator Panel section
under Other Modes.
Parallel Interface
Installation
USB Interface
Network Interface
(Ethernet)
Power Cord
Connector
1-7