Table of Contents
Advertisement
6.
Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1, SATA3G_2)
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical
drives via Serial ATA 3.0 Gb/s signal cables.
EMB-Q77B SATA 3.0Gb/s connectors
NOTES:
•
You must install Windows
Serial ATA hard disk drives.
•
When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.4 SATA Configuration for details.
7.
Serial ATA 6.0Gb/s connector (7-pin SATA6G_1, SATA6G_2)
ThIS connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
EMB-Q77B SATA 6.0Gb/s connectors
NOTES:
•
You must install Windows
Serial ATA hard disk drives.
•
When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.3 SATA Configuration for details.
Chapter 2: Motherboard information
XP Service Pack 3 or later version before using
®
XP Service Pack 3 or later version before using
®
2-21
Advertisement
Table of Contents
