Options - Kyocera FS-1030D Operation Manual

Printer
OPERATION GUIDE

6 Options

The FS-1030D printer has the following options available to satisfy your
printing requirements. For instructions on installing individual options, refer
to the documentation included with the option. Some options are explained
in the following sections.
Expansion Memory (DIMM)
The memory can be increased to
a maximum of 288MB.
Paper Feeder (PF-17)
Holds approximately 250 sheets of A5
to Legal size paper.
NOTE:
Contact your dealer for information about purchasing the
CompactFlash card and DIMM best suited for your printer.
Either the Network Interface Card or the Serial Interface Board can be
installed in the printer.
Network Interface Card (IB-21E)
Enables printing from multiple
computers via a network.
Serial Interface Board Kit (IB-11)
Connect to the computer's serial
printer port with a serial cable.
CompactFlash (CF) Card
A CompactFlash card is a microchip
card that may contain option fonts,
macros, forms etc. The printer reads the
contents of the card into its internal
memory when switched on.
29