Network Interface Card (Ib-21E) - Kyocera FS-1030D Operation Manual

Network Interface Card (IB-21E)

OPERATION GUIDE
The Network Interface Card supports TCP/IP, IPX/SPX, NetBEUI and
Appletalk protocols, so that the printer can be used on network
environments including Windows, Macintosh, UNIX, NetWare, etc.
NOTE:
If the Serial Interface Board is installed, remove it to use the
Network Interface Card.
1
Turn off the printer and disconnect the power cord and printer cable.
2
Remove the option interface slot
cover.
3
Insert the Network Interface Card
and secure it with the screws
removed in step 2.
Options
33