Step4 Connecting The Printer To The Computer; Printer Connections - Kyocera Mita FS-1000+ Installation Manual

Ifs10ep-jp.book Page 6 Friday, December 22, 2000 4:27 PM
STEP
Connecting the Printer to the Computer
4
There are various ways of connecting the printer to the computer, such as through the
parallel interface connector or through the optional network interface board.

Printer Connections

Optional Network
Interface Board
(DC 3.3V)
Before performing this step, be sure to turn off both the printer and the com-
puter's power switches and unplug the printer's power plug from the power
outlet. Failure to do so may result in electrical shock.
A standard Centronics parallel interface connector (
the printer.
6
Network
Parallel Interface
Optional Serial Interface
Board kit (IB-10E)
Serial Interface
Printer (Rear)
) is located on the rear of
Power Supply