Table of Contents
Advertisement
OperaTIng OpTIOnal fOOT end BaCk reST arTICUlaTIng head pIeCe
Head Piece
To Operate the articulating head piece: Grasp either handle under the head section and squeeze. Handle (A) releases
one latch and rotates the head piece on axis "A". Handle (B) releases the other latch and rotates the head section
on axis "B". For ease of operation, it is recommended to release only one latch at a time.
WarnIng
•
The weight of the patient's head is resting on the head piece and must be supported by the operator when the latches
are released and the head piece is being positioned. Failure to adequately support the head piece while positioning
the head could result in patient injury.
•
To avoid possible pinch points when adjusting the head piece, keep your fingers away from the jointed areas.
•
Do not reach between the side of the head extension and the articulating head piece to pull the release handle,
finger injury could result.
Return To Table of Contents
20
Operation guide
A
AXIS
AXIS
1033-090-001 REV J
Foot End Back Rest
B
BOTTOM VIEW
www.stryker.com
Advertisement
Table of Contents
