Kyocera Mita FS-1128MFP Setup Manual page 16

1
2
3
4
1
2
3
4
1
2
3
4
5
6
7
8
9
SETUP GUIDE
DHCPv6
In the IPv6 Setting menu, press
Press [OK]. The DHCPv6 screen appears.
Press or to select whether DHCPv6 is enabled.
Press [OK]. The DHCPv6 is set and the IPv6 Setting menu reappears.
RA(Stateless)
In the IPv6 Setting menu, press
Press [OK]. The RA(Stateless) screen appears.
Press or to select whether RA(Stateless) is enabled.
Press [OK]. The RA(Stateless) is set and the IPv6 Setting menu reappears.
AppleTalk (AppleTalk setting)
AppleTalk is a communications protocol used primarily on Macintosh computers and
also refers to the Mac OS network functions. The default setting is On.
Press [System Menu/Counter]. The Sys. Menu/Count. screen appears.
Press or to select System.
Press [OK]. The System screen appears.
Press or to select Network Setting.
Press [OK]. The Network Setting screen appears.
Press or to select AppleTalk.
Press [OK]. The AppleTalk screen appears.
Press or to select whether AppleTalk is enabled.
Press [OK]. The AppleTalk is set and the Network Setting menu reappears.
or to select DHCPv6.
or to select RA(Stateless).
Panel Setup
15