Express Mode - Kyocera Mita FS-1128MFP Setup Manual

Installing Printer Driver
4
1
2
3
4
28
Click Install Software. The software install
wizard starts up.
From this point, the procedure differs
depending on your version of Windows and
your connection method. Proceed to the
correct procedure for your connection type.
•

Express Mode

• Custom Mode
Express Mode
In Express Mode, the installer automatically detects the machine when it is turned
on. Use Express Mode for standard connection methods.
In the installation method selection window,
select Express Mode. The print system
detection window appears and the installer
detects the connected machines. If the
installer does not detect a print system,
check that the print system is connected via
USB or a network and that it is turned on.
Then return to the print system detection
window.
NOTE:
While the information shown in Windows Vista and Windows XP installation
dialog boxes differs slightly, the installation procedure is the same.
Select the print system to be installed and
click Next.
You can customize the print system name in
the installation settings window. This will be
the name displayed in the Printer window
and in the printer lists displayed in
applications. Specify whether to share the
print system name or set the print system as
an existing machine and then click Next.
IMPORTANT: Step 3 only appears if the print system is connected via a network. It
does not appear if the print system is connected via a USB.
A window appears in which you can check the settings. Check the settings carefully
and then click Install.
SETUP GUIDE