Kyocera Mita FS-1128MFP Setup Manual page 26

1
2
3
4
5
SETUP GUIDE
If the Computer Name tab contains Full computer name and Workgroup
All characters in the Full computer name text box correspond to the entry for Host
Name. (Example: PC4050)
Checking the Entry for Path
Check the share name for the shared folder to which data is sent.
Click Search in the Start menu. The Search Result page opens.
Search the destination computer to which the file is sent. In the Search Companion,
click Printers, Computers, or people, and then click A computer on the network.
On the Computer name text box, type the name of computer (pc4050) you checked
on page 24, and then click Search.
Double-click the name of computer (pc4050) displayed on the search results.
Double-click the "scannerdata" folder and check the full path displayed in the
Address Bar. The characters to the right of the third backslash (\) correspond to the
entry for Path.
(Example: scannerdata)
NOTE: You must use alphabets, numerals, and symbols (ASCII codes from 0 × 20
to 0 × 7F) only to enter Path.
You can specify a subfolder in the shared folder as the location where data is to be
sent. In this case, the entry for Path is "share name\name of a folder in the shared
folder". In the sample window above, "scannerdata\projectA" corresponds to Path.
Sharing PC Folder
25