Table of Contents
Advertisement
3-7-2 OCP 2.0
Follow these instructions to install an OCP 2.0 mezzanine card:
1.
Loosen the thumbscrew on the riser bracket
2.
Lift up the riser bracket out of system.
3.
Remove the screw securing the mezzanine card slot cover.
4.
Remove the slot cover from the system..
5.
Insert the OCP 2.0 mezzanine card into the compartment ensuring that the card is firmly connected
to the connector on the motherboad.
6.
Secure the OCP 2.0 mezzanine card into the system with three screws.
7.
Reverse steps 5-6 to replace the OCP 2.0 mezzanine card.
System Hardware Installation
2
6
4
3
- 37 -
1
5
Advertisement
Table of Contents
