Storage
SAS
Internal
Connectors
Front Panel
LED/Buttons
Rear Panel I/O
Backplane I/O
TPM
Hardware Installation
R182-Z90
4 x 3.5" hot-swappable HDD/SSD bays
2.5" HDD/SSD supported
NOTE: SAS card is required for SAS devices support
R182-Z91
8 x 2.5" SATA/SAS
2 x 2.5" NVMe hot-swappable HDD/SSD bays
NOTE: SAS card is required for SAS devices support
R182-Z92
10 x 2.5" NVMe hot-swappable SSD bays
N/A
1 x M.2 slot
1 x USB 3.0 header
1 x COM header
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane P/N: 9CBP10A3NR-00
Speed and bandwidth:
SAS 12Gb/s, SATA 6Gb/s, PCIe Gen3 x4
1 x TPM header with LPC interface
Optional TPM2.0 kit: CTM000
- 13 -