2-2-15 Broadcom NetXtreme-E 2Px10GBASE-T OCP 3.0 Ethernet
Parameter
Firmware Image Menu
Device Configuration Menu
BIOS Setup
Description
Press [Enter] to view firmware image information.
Press [Enter] to configure advanced items.
Multi-Function Mode
– Configures the NIC Hardware Mode.
– Options available: SF, NPAR 1.0. Default setting is SF.
Number of VFs Per PF
– Configures the number of Virtual Functions Per Physical Function in
multiples of 8 (1-128). This field is only applicable when SR-IOV is
enabled.
– Default setting is 8.
SR-IOV
– Enable/Disable Single Root I/O Virtualization.
– Options available: Enabled, Disabled. Default setting is Disabled.
Number of MSI-X Vectors per VF
– Configures the number of MSI-X Vectors per VF (0-128).
– Default setting is 16.
Maximum Number of PF MSI-X Vectors
– Configures the maximum number of PF MSI-X Vectors (0-512 per
controller).
– Default setting is 74.
- 53 -