Kyocera KM-6030 Operation Manual page 28

Performing the Required Operation at the Scanner
13
If you select On under Continuous
sending in the Scan to PC screen, once
the scanning operation is completed, the
touch panel will return to the Scan to PC
screen, as appropriate, with the current
settings unchanged.
To continue scanning more originals, set
the next original, change any of the
scanning settings as required, and then
press the [Start] key.
Once you have finished scanning originals, press [Cancel].
Note
If Permit file overwrite is selected in the computer's Scanner File Utility when you are using the Scan
to PC function, previous files saved to that computer may be overwritten if a duplicate file name is
use. Be aware of this fact when designating file names for transmission, especially when the
Continuous sending setting is turned ON.
20
Ready to scan.
Place the original and select destination.
Scan to PC-Multiple TX
Destination
Group A
Group B
User A
Delete
Save at
Address
User PC Book
Original
A4
08/25
Single Scan
Auto Rear
Select Orig. Set
Orig.Size Direction
Auto size 300dpi
Select Scanning
Send Size Resolution
Quality
Basic