Scan Settings - Kyocera KM-6030 Operation Manual

8
Check the selected destinations. Use
[ ] and [ ] to make sure that all of the
selected destinations are correct. If an
incorrect or unnecessary destination is
in the list, select it and press [Delete].

Scan settings

9 The Scan Settings menu is displayed in
the right portion of the touch panel. If
you want to change any settings, press
the key that corresponds to that setting.
The following gives an example of the
procedure to specify the orientation of
the original.
Press [Orig. Set Direction].
10 If you set the original with its top edge
towards the rear of the scanner, select
Top Edge. If you set the original with its
top edge towards the left of the scanner,
select Left Edge. Press [Close] to
register the change to that setting or
[Back] if you want to cancel the
operation and return to the previous
setting. The screen will return to that
shown in step 9.
Note
If the setting for the orientation of the original is not appropriate to the actual orientation, scanning
may be accomplished incorrectly. Be sure to confirm the orientation of the original when making
scan settings.
11
Once you have checked all of the
settings, set the original and press the
[Start] key.
Scanning of the original will begin.
If you want to stop the scanning
operation, press [Cancel].
12 If you select ON under Batch scanning in
the [Edit] tab in the Scan Settings menu
screen, a screen that asks whether or
not you want to continue scanning will
appear after scanning of the original is
complete.
If you DO want to continue scanning, set
the next original, change any scan
settings that you want, and then press
the [Start] key.
Once you have finished scanning originals, press [Scanning finished].
Performing the Required Operation at the Scanner
Ready to scan.
Place the original and select destination.
Scan to PC-Multiple TX
Destination
Group A
Group B
User A
Save at
Address
User PC Book
to scan.
ginal and select destination.
ple TX
Select
Orig.Size
Delete Select
Send Size
Address
Book
to scan.
ginal and select destination.
on
"Check direction of original" shown at
right side of display. Follow the steps.
If setting mode is wrong, incorrect copy
will result.
Now scanning originals.
Orig._Set_Direction
Orig. Page
A4
1 sided
Rear
User name: User A
ginal(s).
ginals and press start key.
ing finished" key to finish scanning.
Step 2
Rear
Orig. Set
Direction
300dpi
Scanning
Resolution
Quality Edit
Single Scan
Auto Rear
Select Orig. Set
Orig.Size Direction
Auto size 300dpi
Delete Select Scanning
Send Size Resolution
Quality
Basic
Original Send
A4
08/25/`04 18:31
Single Scan Cancel
Auto Rear Auto
Orig. Set
File Name
Direction
Auto size 300dpi PDF
Scanning
File Type
Resolution
Quality Edit
Basic
Original Send
A4
08/25/`04 18:31
Back Close
Select Original Image
Direction.
Top Edge Left Top
Send
Send E-mail
A4
SCAN006_0000.tif
08/25/`04 18:31
Cancel
Original 1 Page
SCAN0060_000.tif
Scanning
finished
Original
A4
08/25
A4
A4
08/25
19