Scanning With Twain; When Performing The Scanning Operation At The Scanner; When Performing The Scanning Operation At Your Pc - Kyocera KM-6030 Operation Manual

Scanning with TWAIN

The following explains the settings that need to be made in the scanner in order to scan using the
TWAIN function.

When performing the scanning operation at the scanner

1 Press the [Scanner] key.
2
Press [TWAIN].
3 Set the original that you want to scan.
4 Run the TWAIN Source in the corresponding application.
The main dialogue box for the TWAIN Source will appear. Make any settings that you want, click on
the [Connect] button in the dialogue box and, once the connection to the scanner is made, click on
the [Scan] button. Scanning will begin.

When performing the scanning operation at your PC

1
Run the TWAIN Source in the corresponding application.
The main dialogue box for the TWAIN Source will appear. Make any settings that you want, and put
a check mark in the [Waiting Scan] checkbox.
Note
Putting a check mark in the [Waiting Scan] checkbox will allow you to start the actual scanning
operation by pressing the [Start] key at the scanner.
2
Click on the [Connect] button in the main dialogue box and, once the connection to the scanner is
made, click on the [Scan] button.
When the scanner is starting or operating, connection may not be made. In this case, press
[TWAIN] in the Select Scanner Function screen to select the TWAIN mode.
Performing the Required Operation at the Scanner
Select scanner function.
Send
Scan to PC
E-mail
Database
Connection
08/25/`04
Edit
TWAIN
Addr. Book
History
of Sending
25