fantastic furniture Lunar King Single Loft Bunk Manual page 9

Step 5
You will need
Phillips Head
18 x Cam Bolts
(H2) Screwdriver
Insert 18 x Cam Bolts (H2) into the Left and Right Desk Side Panels (P7 & P8),
by tightening with the Phillips Head Screwdriver.
Step 6
You will need
18 x Cam Nuts
Phillips Head
(H1)
Screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut.You
then turn the cam
nut so it tightens
over the bolt.
Insert 18 x Cam Nuts (H1) into panels (P9, P10, P11 & P12). Rotate the Cam Nuts so the
arrows are facing the incoming Bolts.
First attach the Left Desk Side Panel (P7) to panels (P9, P10, P11 & P12), by aligning all the
holes and tightening all the Cam Nuts with a Phillips Head Screwdriver.
Then repeat process to attach the Right Desk Panel (P8) to panels (P9, P10, P11 & P12).
fantasticfurniture.com.au
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
P8
(H2)
(H2)
(H1)
(H3)
(H2)
(H1)
(H2) (H2)
(H2)
(H1)
(H1)
P7 (H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H1)
(H2)
P7
(H1)
P11
(H1)
P12
(H1)
(H2)
(H2)
(H2)
(H2)
This side has covered
edge facing up
P9
P10
(H1)
(H2)
P8
Page 9
(H1)
(H2)