fantastic furniture Lunar King Single Loft Bunk Manual page 24

Step 34
Determine where you would like for the finished loft bunk to be put in your room.
Place the Desk (B) and the Robe (C) in position. Note that the total length of this loft bunk is 2100mm.
Step 35
You will need
8 x Screws (H7)
8 x Nuts (H10)
Phillips Head
1 x Allen Key
Screwdriver
(H4)
Insert 8 x Nuts (H10) into Headboard/Footboard Panels (P3). Ensure to rotate the Nuts so the openings
point towards the incoming Screws.
Attach Panel (P2) to the Headboard/Footboard Panels (P3) with 8 x Screws (H7) tightening with the Allen
Key (H4).
C
P4
(H3)
(H4)
(H10)
P3
(H7)
P2
(H10)
P3
(H7)
(H7)
(H7)
(H7)
B
Make sure that
these panels are
aligned in correct
position
P3
(H10) (H10)
P4
(H10)
(H10)
(H10)
P2
(H7)
(H7)
(H7)
(H7)
Opening of nut
face incoming
screw
Page 24