fantastic furniture Lunar King Single Loft Bunk Manual page 13

Step 13
You will need
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut.You
then turn the cam
nut so it tightens
over the bolt.
Attach the Middle Robe Panel (P15) to panels (P19, P20 & P21), by aligning all the holes, and
tightening the Cam Nuts with a Phillips Head Screwdriver.
Step 14
You will need
4 x Dowels (H3)
Slot in the Robe Back Panel (P22) into the grooves of panels (P13, P15 & P21).
Insert 4 x Dowels (H3) into the Middle Robe Panel (P15).
fantasticfurniture.com.au
P13
(H3)
(H3)
P15
P21
P19
P20
P20
P15
P21
P13
(H3)
P22
(H3)
Raw side
Page 13