fantastic furniture Lunar King Single Loft Bunk Manual page 12

Step 11
You will need
10 x Dowels (H3)
10 x Cam Nuts
(H1)
Insert 10 x Dowels (H3) into Robe Fixed Panel (P19), 2 x Robe Front Support Panels (P20) and
the Robe Back Support Panel (P21).
Insert 10 x Cam Nuts (H1) into Panels (P19, P20 & P21). Rotate the Cam Nuts so the arrows are
facing the incoming Bolts.
Step 12
You will need
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut.You
then turn the cam
nut so it tightens
over the bolt.
Attach Panels (P19, P20, P21) to Left Robe Side Panel (P13), by aligning the holes
and tightening the Cam Nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au
(H1)
(H3)
(H1)
(H3)
(H3)
P13
(H1)
(H3)
(H1)
P19
P21
(H1)
(H1)
(H3)
P19
P20
P20
(H3)
(H3)
(H1)
(H1)
(H3)
(P20) x2
P21
Page 12