fantastic furniture Lunar King Single Loft Bunk Manual page 16

Step 19
You will need
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut.You
then turn the cam
nut so it tightens
over the bolt.
Attach the Right Robe Side Panel (P14) to Panels (P16,
P17, P18, P23 & P24) by aligning the holes, and tightening
the Cam Nuts with the Phillips Head Screwdriver.
Step 20
You will need
4 x Screws 8 x Feet Glides
(H5)
Phillips Head
Screwdriver
(H12)
Secure the Robe Back Panel (P24) to the Robe Top Panel (P16) and Robe Bottom Panel (P17) with
4 x Screws (H5), tightening with the Phillips Head Screwdriver.
Attach the 8 x Feet Glides (H12) to the bottom of Panels (P13, P14 & P18) by gently using a
Hammer or Soft Headed Mallet.
fantasticfurniture.com.au
(H1)
(H12)
(H12)
Hammer
P18
(H12)
P14
P16
P24
P14
(H12)
(H12)
(H5)
(H12)
(H5)
P17
P18
(H12)
(H12)
(H1)
(H1)
(H1)
P23 P18
P17
P18
(H5)
(H5)
P24
P16
P13
Page 16