fantastic furniture Lunar King Single Loft Bunk Manual page 14

Step 15
You will need
6 x Dowels (H3)
Insert 6 x Dowels (H3) into the Robe Bottom Panel (P17).
Attach the 2 x Robe Support Panels (P18) to the Robe Bottom Panel (P17) by aligning the holes.
Step 16
You will need
4 x Cam Nuts 6 x Dowels
(H1)
(H3)
Phillips Head
4 x Screws
Screwdriver
(H5)
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut.You
then turn the cam
nut so it tightens
over the bolt.
Insert 6 x Dowels (H3) into the Robe Side Panel (P13).
Attach the Robe Top Panel (P16) to Robe Side Panel (P13) and Robe Middle Panel
(P15) by aligning the holes, and tightening the Cam Nuts with a Phillips Head
Screwdriver.
Secure The Robe Top Panel (P16) with 2 x Screws (H5) tightening with a Phillips Head
Screwdriver.
Repeat process to attach the Robe Bottom Panel (P17) to Panel (P13 & P15).
fantasticfurniture.com.au
(H3)
This side has
raw edge
P16
(H5)
(H3)
P16
(H3)
(H1)
P13
(H3)
P18
(H3)
P17
P18
(H3)
P15
(H3)
P13
(H3)
(H3)
P17
(H5)
P18)
(H5)
P18
P17
(H3)
(H3)
(H1)
P18
(H3)
P13
Page 14