Kobalt KID 124B-03 Manual page 13

OPERATING INSTRUCTIONS
MODE APPLICATIONS
FINISH Driving self-drilling or
self-tapping screws into
a thin metal sheet.
SELF TAP Driving self-drilling or
self-tapping screws into
a thick metal plate.
FEATURE
The tool will stop
automatically
soon after
the impact
mechanism is
engaged.
The tool speed
will slow down
when the impact
mechanism is
engaged.
13
FUNCTION
The FINISH mode allows
the user to work fast with
precision while not damaging
the workpiece. This mode
helps to prevent over-
tightening of the screw and
without damage (stripping) to
the workpiece. The tool drives
a screw at a faster speed
and then automatically stops
when the tool engages impact
mechanism.
NOTE:
The timing to stop the driving
varies depending on the type
of the screw and material
to be driven. Perform a test
driving before using this
mode.
This mode helps to prevent
the screws from breakage,
stripping the screw heads,
and overtightening. It also
accomplishes quick operation
and good finish at the same
time. The tool drives a screw
with specific speed rotation
and slows down the speed
when it starts to impact.