Parameter Configuration - Ebyte ME31-AAAX2240 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
Wiring: The computer is connected to the RS485 interface of ME31-AXCX4040 through USB to RS485, A is connected to A, B is connected to B.
Networking: Insert the network cable into the RJ45 port and connect to the PC. Power supply: Use DC-12V switching power supply (DC 8~28V) to
supply power to ME31-AAAX2240.

2.3 Parameter configuration

Step 1: Modify the IP address of the computer to be consistent with the device. Here it is modified to 192.168.3.100
to ensure the same network segment as the device and that the IP is different. Please turn off the firewall and try
again if the step failed;
Step 2: Open the network assistant, select the TCP client, enter the remote host IP192.168.3.7 (default parameters),
enter the port number 502 (default parameters), and select HEX to send.
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd
ME31-AAAX2240_UserManul_EN
7