Device Default Parameter Test Steps; Hardware Connection; Device Parameter Configuration - Ebyte NB124ES User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd

NB124ES_User Manual

details provide a download interface.

Network Assistant

XCOM

Ebyte network configuration tool

【Note】The serial port assistant software may be different from that provided on the official website, please refer

to the similar one.

2.3 Device default parameter test steps

Different channels use the same IP but different local ports. For example, the factory-configured channel 1

corresponds to port 8001, and channel 2 corresponds to port 8002. For details, see the chapter "Correspondence

Between Channels and Serial Ports".

1. Connect the serial port server network port and the computer network port with a network cable;

2. Use a USB to RS485 serial cable to connect the USB port of the computer to any RS485 port of the serial server;

3. Use the power adapter (DC 8-28V) to power on the device, and observe whether the indicator light is normal,

refer to "indicator light description";

4. After confirming that there is no problem with the status, proceed to the next step of configuration;

In order to let users have a simple understanding of the serial server, we use the default parameters of the serial

server to conduct data transparent transmission tests. The default parameters of NB124ES serial server device are

shown in the table below.

Chengdu Ebyte Electronic Technology Co.,Ltd

Table of Contents