PREPARATION > Turning the product ON
Turning the power ON
Turn the product ON.
1
Put the z (Power) Switch on the front panel in the up position.
The power comes ON and the Power Indicator lights up.
Power Indicator
2
When the following message is shown on the front display, press RETURN on the
front panel.
When you connect this product to the router with a network cable (wired connection), this
operation is skipped.
It may take about 30 seconds for the message to be shown. The portion marked with "*" varies
depending on the device.
-10
-0
+6
10 100
W/8
LOUDNESS
SELECT
PUSH - ENTER
FLAT
-30dB
Front panel
Power Switch
VOLUME
PURE DIRECT
PRESET
RETURN
CONNECT
METER
PHONES
SPEAKERS
PEAK
OFF
VU
DIMMER
YPAO MIC
*
RETURN
CONNECT
39
-50 -40
POWER
0.01
INPUT
BASS