NAMES OF PARTS AND THEIR FUNCTIONS > Unit
NAMES OF PARTS AND THEIR FUNCTIONS
Unit
Front panel
The following are the names of parts on the front of the unit and an explanation of their functions.
a
METER
PHONES
SPEAKERS
OFF
YPAO MIC
d
e
f
g
a
z (Power) Switch/Indicator
Turns this product ON/OFF (p.39).
When the switch is up:
The power is ON or in Standby. Pressing the zAMP key on the remote control switches the power between ON and
Standby. This product also goes into Standby in the following situations.
When the Auto Power Standby function is activated (p.105)
(
When the switch is down:
The power is OFF. This product cannot be operated with the remote control. This product cannot also be linked with
a Bluetooth device, a network device, or MusicCast Controller App.
The indicator lights up as follows according to the state of power.
Power ON: Indicator lights up.
Power in Standby: Indicator is faintly lit.
Power OFF: Indicator is off.
NOTE
When the indicator is flashing, it means the protective circuit has been activated and the power will not turn ON, in order to
protect the product. Please contact an authorized Yamaha service center to have it repaired.
b
LEFT/RIGHT Meters
These indicate the audio output levels for the LEFT & RIGHT channels.
b
-50 -40 -30
POWER
INPUT
BASS
PEAK
VU
DIMMER
h
i
jk
LEFT
RIGHT
-20
-10
-0
+6
-50 -40 -30
-20
0.01
0.1
1
10 100
W/8
POWER
0.01
0.1
1
dB
dB
TREBLE
BALANCE
LOUDNESS
L
R
l m n
12
-10
-0
+6
PURE DIRECT
10 100
W/8
SELECT
PRESET
PUSH - ENTER
FLAT
-30dB
RETURN
CONNECT
o
p
q
c
VOLUME
r
s t