Table of Contents
Advertisement
PLAYBACK > Adjusting the sound to your preference
Making it easier to hear bass and treble at low volumes
(LOUDNESS)
It lowers the volume of the midrange and allows the listener to enjoy natural sound even at low volumes by
compensating for the human auditory characteristic that makes it difficult to hear bass and treble at low
volumes.
CAUTION
If you enable Pure Direct after adjusting LOUDNESS, the input signal bypasses the loudness adjustment function and the
(
volume increases suddenly. To protect your ears and the speakers from damage, always check the state of LOUDNESS before
enabling Pure Direct, and if it is set to any position other than FLAT, lower the volume.
LOUDNESS
FLAT
-30dB
1
Put LOUDNESS to the FLAT position.
2
Turn VOLUME up to the maximum level at which you normally listen to music.
3
Turn LOUDNESS counterclockwise to a moderate volume.
LOUDNESS
FLAT
NOTE
If the YPAO Volume function is enabled, loudness adjustment cannot be used.
(
When Pure Direct is used, the settings are disabled (equivalent to the FLAT position).
(
After making the settings, if the loudness effect is too strong (or weak) when played at your desired volume, adjust it again.
(
-30dB
57
Advertisement
Table of Contents
