Table of Contents
Advertisement
Note:
The appliance requires:
¡ A maximum of 1 W when the appliance is in opera-
tion with the display switched on
¡ A maximum of 0.5 W when the appliance is in oper-
ation with the display switched off
Saving energy
If you follow these instructions, your appliance will use
less power.
Select the cooking zone to match the size of your
pan. Centre the cookware on the hob.
Use cookware whose base diameter is the same dia-
meter as the hotplate.
Tip: Cookware manufacturers often give the upper
diameter of the saucepan. It is often larger than the
base diameter.
¡ Unsuitable cookware or incompletely covered cook-
ing zones consume a lot of energy.
4 Suitable cookware
Cookware that is suitable for induction cooking must
have a ferromagnetic base, i.e. it must be attracted by
a magnet. The base must also match the size of the
Cookware
Recommended cook-
ware
Suitable
Not suitable
Notes
¡ Do not use adapter plates between the hob and the
cookware.
Materials
Stainless steel cookware in a sandwich
design that distributes the heat well.
Ferromagnetic cookware made of enamelled
steel, cast iron or special induction cookware
made of stainless steel.
The base is not fully ferromagnetic.
Cookware bases with aluminium content.
Cookware made from normal thin steel,
glass, clay, copper or aluminium.
Cover saucepans with suitable lids.
¡ Cooking without a lid consumes considerably more
energy.
Lift lids as infrequently as possible.
¡ When you lift the lid, a lot of energy escapes.
Use a glass lid.
¡ You can see into the pan through a glass lid
without having to lift it.
Use pots and pans with flat bases.
¡ Uneven bases increase energy consumption.
Use cookware that is suitable for the quantity of food.
¡ Large items of cookware containing little food need
more energy to heat up.
Cook with only a little water.
¡ The more water that is contained in the cookware,
the more energy is required to heat it up.
Turn down to a lower power level early on.
¡ If you use an ongoing power level that is too high,
you will waste energy.
cooking zone. If cookware is not detected on a cooking
zone, place this on the cooking zone with the next
smallest diameter.
4.1 Size and characteristics of the cookware
To correctly detect the cookware, take the size and the
material of the cookware into consideration. All cook-
ware bases must be perfectly flat and smooth.
You can use Cookware test to check whether your
cookware is suitable. You can find more information
about this under
→ "Cookware test", Page 17.
Properties
This cookware distributes the heat evenly,
heats up quickly, and ensures that it can be
detected easily.
This cookware heats up quickly and ensures
that it can be detected easily.
If the ferromagnetic area is smaller than the
base of the cookware, only the area that is
ferromagnetic heats up. As a result, the heat
is not distributed evenly.
These reduce the ferromagnetic area, which
means that less power is emitted to the
cookware. This cookware may not be suffi-
ciently detected or may not be detected at
all, and therefore does not heat sufficiently.
¡ Do not heat up empty cookware and do not use
cookware with a thin base, as this may become very
hot.
Suitable cookware en
7
Advertisement
Table of Contents
