Advertisement
Command Line Interface. Go to the section titled 'Configuring the T1 Interface'
under the 'Command Line Interface Configuration' for more information.
Configuring the RBS Trunk
First, we will configure a Codec List to be used by the RBS trunk. To do this,
click on 'Codec Lists' under 'Voice'.
Click on the 'Add New Codec List' button to create a new Codec List.
Specify a name for the Codec List in the 'Codec List Name' field.
Specify the primary Codec to be used as 'Codec #1' and the secondary Codec to
be used as 'Codec #2'. Once those are configured, click on 'Apply'.
Advertisement
