Specifications - Boss EQUALIZER Maintenance Manual


i
NOTE: All specifi cations are approximate and subject to change.

i
NOTE: Refer to the powerbase owner's manual for complete specifi cations on base and
Sizes - Width adjustable 22" to 30" (55.88cm to 76.2cm) by 1" (2.54cm) increments.
Seat depth adjustable 18" to 26" (45.72cm to 66.04cm) by 1" (2.54cm) increments.
BOSS 4.5 / 6 / 6NS / 6.75 seat to fl oor with shortened seat post 17.25" (44cm).
BOSS 4.5 / 6 / 6NS / 6.75 seat to fl oor with standard seat post 18.50" (47cm).
Back height adjustable 19" to 24.5" from top of seat pan to top of back.
o o
Tilt Angle - 0 to 50
4 o or 8 o
Tilt Weight Capacity -
Controls - Separate switch box or optional joystick operated with drive lockout while tilted.
Mounting - 4 Post Seating Mount.
Arms - Adjustable height, angle, removable, fl ip-up and adjustable position pads.
Back Canes - Adjustable back angle 4
canes can be folded down for easy loading & transport. 1" square tube standard.
Leg Rigging Options - Flip up foot plate mounted on a length and angle adjustable center col-
umn with calf pads. Elevating legrest and Flip up swing away footrest options.
Maximum Incline Rating - BOSS 4.5
Hard Surface
Soft Surface
Structural Capacity
With Tilt
Weight Capcity Information - Installing the Boss HD Equalizer seating system on a power
base reduces the published weight capcity (maximum rider weight) of the power base by 50 lbs.
This is because published power base specifi cations are based on standard seating systems
that weigh less than the BOSS HD Equalizer Seating System.

SPECIFICATIONS

operation.
while maintaining a low center of gravity.
pre-tilt angles adjustment.
BOSS HD EQUALIZER
450 lbs.
o
anterior to 20
o
9
o
5
BOSS 4.5
400 lbs.
BOSS HD Equalizer Til t System
BOSS EHD EQUALIZER
o
posterior by 4
BOSS 6/6NS
o
8
o
3
BOSS 6/6NS
550 lbs.
11
600 lbs.
o
increments. The back
BOSS 6.75
o
8
o
3
BOSS 6.75
600 lbs.