Fix The Backrest Cover - Takara Belmont YUME DX Installation Instructions Manual

<Without headrest model no. SU-YM2A and SU-YM2B only>
1. Insert the short-circuit connector enclosed with the backrest
into the one from the main body.
Connector from the backrest
Connector
from mainbody
2. Fix the connector on the hook as the following figure shows.

5-14. Fix the backrest cover

1. The apron from seat cushion is inserted between
the backrest cushion and the cylinder,then fixed
with two screws(M4 x 18)
2. Attach the backrest cover and fixed with six
screws(M4 x 18)
Hook
(Fold here to fix)
Connector from the backrest
Connector from the main body
Backrest
Apron
-14-
Raised the cylinder cover
Backrest Cover
Cylinder