Attach The Backrest; Wiring Connection - Takara Belmont YUME DX Installation Instructions Manual

Note: In attaching the seat cover, the apron to be put
on the seat cover as the figure shows.

5-12. Attach the backrest

1. Raise the backrest frame by pressing P2 button.
2. Fit the backrest into the braces of the frame,
then fix it with the screws (M6x20).

5-13. Wiring connection

<With headrest model no. SU-YM2AM and SU-YM2BM only>
1. Connect the cable connector from the backrest with
the one from the main body.
2. Fix the connector on the hook of the backrest frame
Connector from the backrest
Connector
from the main body
-13-
seat
seat cover
backrest frame
braces
apron