Ac Setting - HDL Granite Display User Manual

Up to 8 ACs are supported by Granite, and each AC can be configured independently.
Click "AC" in configuration page, as shown in Figure 6-1. This page includes the following
setting items for AC:
① AC information setting: enable/disable the AC, edit the remark/operation ways.
② Fan speed/mode selection: select fan speed, enable/disable mode button.
③ HVAC setting: edit the information, including Subnet ID, Device ID and AC No. of the
corresponding HVAC. Drag the AC in the list of added devices on the right can add AC
as well. Please refer to
④ Temperature range: to set the temperature adjustment range, the minimum and
maximum value can both be set between 0-30℃.
⑤ Temperature source: to select the source of the temperature data. Edit the information of
external device if "external" is selected.
⑥ Others: to enable/disable Eco mode and indoor temperature display.
HDL Automation Co., Ltd.
http://www.hdlautomation.com

6 AC Setting

Add Light for reference.
Figure 6-1 AC setting
Granite Display (Buspro) User Manual
20