Granite Display (Buspro) User Manual
5 Scene Setting
Click "Scene" in configuration page, as shown in Figure 5-1.
User may enable/disable the scene, or edit the remark/icon for the scene in this page.
Figure 5-1 Scene setting
5.1 Add Target to Scene
Click ">" at the end of the scene to show all the targets in the scene, as shown in Figure 5-2.
The scene in the figure already includes one target. If another 4 targets are wanted (which
means the total target number will be 5), then the user should enter "from 1 to 5" in "Input
target number", and click "Read target" to add another 4 targets to the scene.
Notice: one scene supports up to 99 targets.
HDL Automation Co., Ltd.
http://www.hdlautomation.com
17