Table of Contents
Advertisement
Click "Light" in configuration page, as shown in Figure 3-1.
3.1 Add Light
User may add lights via the following two ways (as shown in Figure 3-1):
① Add manually: enter the "Subnet ID", "Device ID" and "Channel" at the top of the window,
then click "Manually".
② Fast add: the devices that are already added to the system (click "Fast search" at the
main window of Buspro Setup Tool 2 to search for added devices) will be shown on the
right side of the window. Drag the device from right to left to add the device to Granite.
The added lights will be shown in the list below, and user may change the remark and type.
Click "Save" after editing.
3.2 Delete Lights
In lighting list, click "Delete" button at the top right side of the light to delete.
HDL Automation Co., Ltd.
http://www.hdlautomation.com
3 Lighting Setting
Figure 3-1 Lighting setting
Granite Display (Buspro) User Manual
15
Advertisement
Table of Contents
